Iomega Zip 250 SCSI Drive User's Manual

Zip Tips

Here are a few tips you'll want to keep in mind to care for your Zip drive and disks!

Always make sure the power supply is connected to the drive before inserting a Zip disk.

CAUTION! If a Zip disk is inserted without the power supply connected, and power is then applied, it could damage the Zip drive. If you accidentally insert a disk when the power supply is not connected, eject it using the manual disk eject procedure, then connect the power supply and reinsert the disk.
Never use ordinary 3.5" floppy diskettes or floppy head-cleaning disks in your Zip drive. They will cause severe damage to the drive.
For best results, operate your Zip drive on a level surface.
Always remove the Zip disk from the drive when you are transporting your Zip drive.

CAUTION! Use only an Iomega Zip 250 power supply. Other power supplies might damage your Zip drive.
Avoid exposing the Zip drive and Zip disks to dust, direct sunlight, high temperature, moisture, or magnetic fields (such as monitors and some speakers).
Before connecting or disconnecting your Zip drive, always shut down the computer and disconnect power from the Zip drive.
If you have other drives or a scanner connected to the Zip drive, make sure the power supply is connected even if you are not using the Zip drive. Power to the drive is required for correct data pass-through.