Getting Started

Here's how to get started using your Zip 250 SCSI drive:

1. Unpack the Zip drive and accessories.




1. Solutions CD (includes IomegaWare software and the User's Manual) 2. Zip 250 Drive Quick Install Guide 3. SCSI Data Cable 4. Power Supply 5. Zip 250 SCSI Drive

NOTE: You will need to purchase a Zip disk to use your Zip drive (no Zip disks are included in this package). Use only genuine Zip disks. Other disks will damage your drive. The Zip 250 drive features backward compatibility that enables you to read and write to 100MB Zip disks. However, because of the higher capacity of the Zip 250 drive, performance when writing to a 100MB Zip disk is significantly reduced.

2. Install the IomegaWare software.
NOTE: You must install IomegaWare software first! Installing IomegaWare software installs the drivers your computer needs to support the Zip drive. If the necessary drivers are not installed, the Zip drive might not be recognized or might not work correctly.
3. Connect your Zip SCSI drive.

*100MB or 250MB capacity where 1MB = 1 million bytes. The capacity reported by your operating system may vary.