Follow the steps below to set up your Peerless drive system. Then choose either the USB or FireWire to finish connecting the drive system to your computer.

1. Set the Peerless base (2) into the interface module (1). When these two components are connected, they are called the base station.

   

2. Insert the disk (3) into the top of the base station (1).

   

3. Choose the type of drive you purchased to continue:

• I purchased a USB Peerless drive system.

• I purchased a FireWire Peerless drive system.

| top | home | previous | next for USB | next for FireWire |