English | Deutsch | Français | Español | Italiano | Svenska | Nederlands Iomega® CD-RW USB The documents listed below contain information regarding error messages you may receive while using your Iomega CD-RW Predator USB Drive. Please visit the software download section of our Web site for information on software patches, updates and upgrades. Windows XP . Windows 98 . Windows 2000 . Windows Me . Other Windows XP "Could not write to memory" error when burning a CD in Windows   "Simulated write mode enabled. Simulating the CD write at 4x. Error writing to the disc. I/O error - Logical Block address out of range, Error - operation was not successful" error message while burning a CD using HotBurn   "Read only" error when I copy a file from a CD I burned to my computer   Why do I get an error deleting a file or folder from my CD?   "This disc is not a writable disk" error message in HotBurn and Windows XP   My Iomega HotBurn software will not install properly on Windows 2000/XP and Windows NT   Do I need to be logged on as Administrator to install and use the Iomega HotBurn software?   What should I do if my computer or CD burning software freezes, stops responding or appears to stop burning the disc?   "Please insert a CD with sufficient space" error message when trying to use Easy CD Creator   "Drive is not accessible" or "X:\ is not accessible" error message when trying to use my Iomega CD-RW (ZipCD 650) drive   How can I avoid I/O, buffer underrun, trackwriter or other CD creation errors when using my CD-RW USB or FireWire drive with my HotBurn or Adaptec (Roxio) software in Windows?   How do I resolve power calibration errors when using my Iomega CD-RW (ZipCD) drive?   How do I properly release the Iomega CD-RW (ZipCD) drive from a system to help avoid unsafe removal errors?   “Error 5. Access is denied.” error message when using the Iomega QuikSync 3 software to backup files to a CD-RW drive   "Cannot create or replace: Access is denied" error message when using Iomega HotBurn or HotBurn Pro   "Error in writing on the logical block" error message when burning a CD with the Iomega CD-RW (ZipCD) drive   My software reports an error message stating that I should insert a blank CD after a blank CD is already inserted   Why does my system ask for a disk when booting if the Iomega USB drive is no longer connected?   back to top Windows 98 "Could not write to memory" error when burning a CD in Windows   "Simulated write mode enabled. Simulating the CD write at 4x. Error writing to the disc. I/O error - Logical Block address out of range, Error - operation was not successful" error message while burning a CD using HotBurn   "Read only" error when I copy a file from a CD I burned to my computer   Why do I get an error deleting a file or folder from my CD?   What should I do if my computer or CD burning software freezes, stops responding or appears to stop burning the disc?   "Please insert a CD with sufficient space" error message when trying to use Easy CD Creator   "Drive is not accessible" or "X:\ is not accessible" error message when trying to use my Iomega CD-RW (ZipCD 650) drive   How can I avoid I/O, buffer underrun, trackwriter or other CD creation errors when using my CD-RW USB or FireWire drive with my HotBurn or Adaptec (Roxio) software in Windows?   How do I resolve power calibration errors when using my Iomega CD-RW (ZipCD) drive?   How do I properly release the Iomega CD-RW (ZipCD) drive from a system to help avoid unsafe removal errors?   “Error 5. Access is denied.” error message when using the Iomega QuikSync 3 software to backup files to a CD-RW drive   "Cannot create or replace: Access is denied" error message when using Iomega HotBurn or HotBurn Pro   "Error in writing on the logical block" error message when burning a CD with the Iomega CD-RW (ZipCD) drive   My software reports an error message stating that I should insert a blank CD after a blank CD is already inserted   Why does my system ask for a disk when booting if the Iomega USB drive is no longer connected?   back to top Windows 2000 "Could not write to memory" error when burning a CD in Windows   "Simulated write mode enabled. Simulating the CD write at 4x. Error writing to the disc. I/O error - Logical Block address out of range, Error - operation was not successful" error message while burning a CD using HotBurn   "Read only" error when I copy a file from a CD I burned to my computer   Why do I get an error deleting a file or folder from my CD?   My Iomega HotBurn software will not install properly on Windows 2000/XP and Windows NT   Do I need to be logged on as Administrator to install and use the Iomega HotBurn software?   What should I do if my computer or CD burning software freezes, stops responding or appears to stop burning the disc?   "Please insert a CD with sufficient space" error message when trying to use Easy CD Creator   "Drive is not accessible" or "X:\ is not accessible" error message when trying to use my Iomega CD-RW (ZipCD 650) drive   How can I avoid I/O, buffer underrun, trackwriter or other CD creation errors when using my CD-RW USB or FireWire drive with my HotBurn or Adaptec (Roxio) software in Windows?   How do I resolve power calibration errors when using my Iomega CD-RW (ZipCD) drive?   How do I properly release the Iomega CD-RW (ZipCD) drive from a system to help avoid unsafe removal errors?   “Error 5. Access is denied.” error message when using the Iomega QuikSync 3 software to backup files to a CD-RW drive   "Cannot create or replace: Access is denied" error message when using Iomega HotBurn or HotBurn Pro   "Error in writing on the logical block" error message when burning a CD with the Iomega CD-RW (ZipCD) drive   My software reports an error message stating that I should insert a blank CD after a blank CD is already inserted   "The source disk is empty. Error - operation was not successful." error message when trying to run the Iomega HotBurn system test in Windows 2000   Why does my system ask for a disk when booting if the Iomega USB drive is no longer connected?   back to top Windows Me "Could not write to memory" error when burning a CD in Windows   "Simulated write mode enabled. Simulating the CD write at 4x. Error writing to the disc. I/O error - Logical Block address out of range, Error - operation was not successful" error message while burning a CD using HotBurn   "Read only" error when I copy a file from a CD I burned to my computer   Why do I get an error deleting a file or folder from my CD?   What should I do if my computer or CD burning software freezes, stops responding or appears to stop burning the disc?   "Please insert a CD with sufficient space" error message when trying to use Easy CD Creator   "Drive is not accessible" or "X:\ is not accessible" error message when trying to use my Iomega CD-RW (ZipCD 650) drive   How can I avoid I/O, buffer underrun, trackwriter or other CD creation errors when using my CD-RW USB or FireWire drive with my HotBurn or Adaptec (Roxio) software in Windows?   How do I resolve power calibration errors when using my Iomega CD-RW (ZipCD) drive?   How do I properly release the Iomega CD-RW (ZipCD) drive from a system to help avoid unsafe removal errors?   “Error 5. Access is denied.” error message when using the Iomega QuikSync 3 software to backup files to a CD-RW drive   "Cannot create or replace: Access is denied" error message when using Iomega HotBurn or HotBurn Pro   "Error in writing on the logical block" error message when burning a CD with the Iomega CD-RW (ZipCD) drive   My software reports an error message stating that I should insert a blank CD after a blank CD is already inserted   Why does my system ask for a disk when booting if the Iomega USB drive is no longer connected?   back to top Other "Simulated write mode enabled. Simulating the CD write at 4x. Error writing to the disc. I/O error - Logical Block address out of range, Error - operation was not successful" error message while burning a CD using HotBurn   "Read only" error when I copy a file from a CD I burned to my computer   Why do I get an error deleting a file or folder from my CD?   What should I do if my computer or CD burning software freezes, stops responding or appears to stop burning the disc?   Does Iomega support any products with BeOS?   Which Iomega drives will work with Linux?   Why does my system ask for a disk when booting if the Iomega USB drive is no longer connected?   back to top live chat email contact is my drive in warranty? returns & warranty check return status