 |
 |
|
 |
|
 |
email to a friend |
 |
print this document |
|
"Simulated write mode enabled. Simulating the CD write at 4x. Error writing to the disc. I/O error - Logical Block address out of range, Error - operation was not successful" error message while burning a CD using HotBurn® Document # 11884e.html This error occurs when the Iomega® CD-RW (ZipCD) drive first starts writing information to a disc and is usually caused by the internal buffer being full. Make sure that your HotBurn® software is updated. To update the software go to http://www.iomega.com/software/hotburn/hotburnpc_downloads.html If you still experience problems after updating the software, please click the appropriate link below for additional CD creation error troubleshooting information. PC
Mac
|
|
Document Survey |
||||||||||||||||||||||||||
