Please use the following steps to copy one CD to another CD, or if you are using Iomega® HotBurn® Pro version 2.3.1 or higher, copy one DVD to another DVD using the HotBurn CD Copy feature.

HotBurn Pro users: This document contains information on how to use the basic options of HotBurn Pro. For information on how to use the HotBurn Pro Advanced options, please go to http://www.iomega.com/support/manuals/hotburnpro/main.html

Important: The HotBurn Pro software that supports DVD writing, version 2.3.1 or higher, does not support copying a copyright protected DVD disc.

Copy a CD or DVD using only your CD or DVD rewriteable drive

1. Place the CD you want to copy into your CD-RW drive.
   
   
2. Open the HotBurn software.
   
   
3. Click the CD Copy button.
   
   
4. For the Source: click Select, CD Drive, choose your CD or DVD rewriteable drive from the drive list and then click the OK button.
   
   
5. For the Destination: click Select and then choose Image.
   
   
6. Type a name for the image in the space provided and then click Save.
   
   
7. Click the Create CD button.
   
   
8. Once the writing session is done, click the Complete button.
   
   
9. Open your CD or DVD rewriteable drive and remove the disc you used to create the image.
   
   
10. Place a blank CD or DVD disc into your drive.
    
    
11. For the Source: click Select, Image and then choose the image you just created.
    
    
12. For the Destination: click Select, CD-R/RW Drive, choose your CD or DVD rewriteable drive from the drive list and then click the OK button.
    
    
13. Click the Create CD button.
    
    
14. Once the writing session is done, click the Complete button.
    
    

Copy a CD using your CD-ROM or DVD-ROM as the source and your CD or DVD rewriteable drive as the destination drive

Note: Creating a CD or DVD disc using your CD-ROM or DVD-ROM drive as the source drive increases your chance of experiencing CD creation errors when copying. If you encounter problems copying CDs or DVDs when using your CD-ROM or DVD-ROM drive as the source drive, then the audio extraction rate of your CD-ROM or DVD-ROM drive may be to slow. Try copying your CD or DVD disc using only your CD or DVD rewriteable drive as shown in the steps above


1. Place the CD or DVD disc you want to copy into your CD-ROM or DVD-ROM drive.
   
   
2. Open the HotBurn software.
   
   
3. Click the CD Copy button.
   
   
4. For the Source: click Select, CD Drive, choose your CD-ROM or DVD-ROM drive from the drive list and then click the OK button.
   
   
5. For the Destination: click Select, CD-R/RW Drive, choose your CD or DVD rewriteable drive from the drive list and then click the OK button.
   
   
6. Click the Create CD button.
   
   
7. Once the CD writing session is done, click the Complete button.
   
   

		If you did not find your answer...
		Click here for additional troubleshooting and support options