Please locate the appropriate Iomega CD-RW (ZipCD™) drive listed below and follow the steps to manually eject a disc from your drive.
ZipCD 4x4x24 ATAPI drive
Caution: Never remove a disc manually while your ZipCD drive is on.
- Ensure your computer is off and unplug your computer's power cord from the electrical outlet.
- Insert your fingernail into the slot on the upper left-hand corner of your ZipCD drive door and gently pull downward until the door opens.
- Insert a straightened paper clip into the manual eject hole and press gently until the tray opens and the disc is released. Please refer to the illustrations below.
Note: If the disc does not eject immediately, repeat the manual eject procedure until the disc is released.
ZipCD 8x4x32 ATAPI drive
Caution: Never remove a disc manually while your ZipCD drive is on.
- Ensure your computer is off and unplug your computer's power cord from the electrical outlet.
- Insert your fingernail into the slot on the upper left-hand corner of your ZipCD drive door and gently pull downward until the door opens.
- Insert a straightened paper clip into the manual eject hole and press gently until the tray opens and the disc is released. Please refer to the illustrations below.
Note: If the disc does not eject immediately, repeat the manual eject procedure until the disc is released.
ZipCD 12x4x32 ATAPI drive
Caution: Never remove a disc manually while your ZipCD drive is on.
- Ensure that your computer is off and unplug your computer's power cord from the electrical outlet.
- Insert a straightened paper clip into the manual eject hole located on the front of your ZipCD drive. Press gently until the tray opens and the disc is released. The manual eject hole is shown in the image below.
Note: If the disc does not eject immediately, repeat the manual eject procedure until the disc is released.
ZipCD 6x4x24x4 ATAPI DVD drive
Caution: Never remove a disc manually while your ZipCD drive is on.
- Ensure that your computer is off and unplug your computer's power cord from the electrical outlet.
- Insert a straightened paper clip into the manual eject hole located on the front of your ZipCD drive. Press gently until the tray opens and the disc is released. The manual eject hole is shown in the image below.
Note: If the disc does not eject immediately, repeat the manual eject procedure until the disc is released.
ZipCD 12x10x32 ATAPI drive
Caution: Never remove a disc manually while your drive is on.
- Ensure that your computer is off and unplug your computer's power cord from the electrical outlet.
- Insert a straightened paper clip into the manual eject hole located on the front of your drive. Press gently until the tray opens and the disc is released. The manual eject hole is shown in the image below.
Note: If the disc does not eject immediately, repeat the manual eject procedure until the disc is released.
Iomega CD-RW 12x10x32 ATAPI drive
Caution: Never remove a disc manually while your drive is on.
- Ensure that your computer is off and unplug your computer's power cord from the electrical outlet.
- Insert a straightened paper clip into the manual eject hole located on the front of your drive. Press gently until the tray opens and the disc is released. The manual eject hole is shown in the image below.
Note: If the disc does not eject immediately, repeat the manual eject procedure until the disc is released.
Iomega CD-RW 16x10x40 ATAPI drive
Caution: Never remove a disc manually while your drive is on.
- Ensure that your computer is off and unplug your computer's power cord from the electrical outlet.
- Insert a straightened paper clip into the manual eject hole located on the front of your drive. Press gently until the tray opens and the disc is released. The manual eject hole is shown in the image below.
Note: If the disc does not eject immediately, repeat the manual eject procedure until the disc is released.
