The Zip® drive is the easiest, most economical way to expand your storage, move your files and backup your hard drive.
Unlimited storage on removable 100MB disks, compact, light and portable - use it at home, in the office, on the road or anywhere you need fast reliable storage space.
| System Requirements | |
|
|
| General | |
| Disk storage capacity: | Uses Zip 100MB disks |
| Operating system compatibility: |
|
| Interface: | IDE (ATAPI) |
| Connection type: | 40 pin ribbon cable |
| Power requirements: | 5V, 1A continuous, 1.7 A peak |
| Acoustical noise: | (operating) less than 32 dBA |
| Dimensions (L x W x H): | 163.6mm x 101.4mm x 25.4mm |
| Weight: | 13.62 oz. (386.2 grams) |
| Read/write protection: | Via software (optional password protection) |
| Performance | |
| Average seek time: | 29 milliseconds |
| Maximum sustained transfer rate: | 1.40 MB/sec |
| Maximum throughput: | up to 60MB/minute |
| Rotational speed: | 2941 RPM |
| Average start/stop time: | 3 seconds |
| Long format time (surface verify): | 10 minutes (avg.) |
| Short format time: | 10 seconds (avg.) |
| Buffer size: | 16K |
| Reliability and service | |
| Bit Error Rate: | 1 in 1013 |
| Disk drop height/shock tolerance: | 8 ft/1000G | Warranty drive/media: | 1 year/5 years |
| Automatic sleep mode: | 15 minutes |
| Operating conditions | |
Temperature:
|
|
Relative humidity:
|
|
Vibration:
|
|
Shock @ 11 ms duration 1/2 sine wave:
|
|
Altitude (operating):
|
|
All specifications are subject to change and depend on your system.